Expert Gravel Pathway & Driveway Install and Repair Services in Seattle

Let’s face it—a great gravel surface isn’t just a matter of dumping and raking. If you skip essential steps like base prep, fabric installation, or proper compaction, you’ll find yourself filling potholes after every rainstorm. Our mission? To build paths and driveways that shed water, stay intact, and look sharp—even on Seattle’s notorious hills and quaint alleys.

We proudly serve Admiral, Alaska Junction, Alki, Fauntleroy, Arbor Heights, Delridge, Gatewood, High Point, Morgan Junction, and Roxhill.

What Challenges Do We Address?

• Potholes, ruts, and washouts after every storm
• Unpleasant mud in winter and frustrating dust in summer—no solid base beneath your gravel
• Gravel spreading into lawns, flower beds, and the street due to insufficient edging or incorrect gradation
• Standing water at your garage or gate because of improper grading
• Wheel ruts that expose fabric—or worse, no fabric at all

What We Install (and Why It Works)

• Proper Base — We excavate soft spots and add crushed rock base (not round rock) in compacted lifts for stability.

• Geotextile Road Fabric — Only where it’s needed: under driveways and paths to keep the base from mixing with clay (never in planting beds).

• Correct Top Course:

  • Paths: ¼″-10 or ⅜″ minus (providing a smooth finish that’s friendly to heels and strollers).
  • Driveways: ⅝″ minus or 1¼″ minus (interlocks beautifully and won’t slip).

• Real Compaction — We use plate and roller compaction for each lift; we don’t just drive on it!

• Edges That Hold — Steel/aluminum edging or timber/concrete restraints to keep your gravel exactly where it belongs.

• Drainage That Sheds — We ensure proper crown or cross-slope (⅛–¼″ per foot), swales, or tie-ins to drains as necessary.

• Stabilization Options — Honeycomb/gravel grids for those steep approaches and tight turns.

While pea gravel looks great, it moves too easily. We’ll use it in decorative pockets only—never where vehicles need traction!

Install & Repair Options

• Full Build — We handle everything from excavation, fabric installation, and base in lifts to top course application, compaction, and edging.
• Resurface — We can scarify ruts, add base where it’s thin, reset the grade, and top it off with fresh minus, followed by compaction.
• Drainage Fixes — Need to add a channel drain or catch basin? We’ve got you covered, plus we can reroute downspouts away from your drive.
• Tight Access Specialists — Alley pads, side-yard ribbons, and slope approaches are our specialties.

Quick Coverage & Ordering (So It Makes Sense)

• 1 cubic yard at 2″ depth covers approximately 160 sq ft (a handy rule of thumb for minus products).
• Base Math: For a 4″ base over 400 sq ft, you’ll need around 5 yd³; add 10–15% for compaction losses.
• Typically, a driveway refresh requires 1–3 yd³ of ⅝″ minus, depending on the rut depth.

Our Annual Maintenance Plan (Your Yard’s Best Friend)

• Pothole/Rut Repair — Scarify, add base, and re-compact (no quick fixes here!).
• Edge Patrol — We’ll re-spike edging and sweep stray gravel off your lawn and walks.
• Drainage Check — Keeping inlets clear and adjusting swales after major storms.
• Top-Up Passes — A light refresh of fines to keep the surface locked in place.
• Weed Control — Pre-emergent treatments and hand-pulling along edges (we prioritize Integrated Pest Management).

We’re a low-maintenance landscaping crew focused on fewer potholes, less tracking, and a longer lifespan for your surfaces.

Service Cadences (Choose What Works for You)

• Quarterly — Includes spring/fall resets and two checks during storm season.
• Bi-Monthly — Ideal for shaded, tree-littered, or steep sites.

(New builds on slopes may start out monthly for the first 60–90 days, then taper down.)

What’s Included in Annual Maintenance

• A detailed grade read and low-spot map with photos.
• Our scarify/compact method for potholes (no “top it and hope”).
• Edging resets and cleanup at borders.
• Drainage inlet clean-out and minor swale adjustments.
• Optional dust control treatment during peak summer months.

Why Annual Maintenance Matters

• Safer Footing & Traction — Fewer slips and less washboarding.
• Longer Surface Life — Locked fines mean less rock loss and tracking.
• Cleaner Look — Crisp edges, consistent color, and no scattered gravel.
• Lower Costs — Timely, small fixes are more budget-friendly than full rebuilds.

How the Process Works

1. Free Estimate — We start with photos or a quick walkthrough to provide clear, upfront pricing.
2. Plan & Prep — We confirm your base and fabric needs, edging, and drainage routes.
3. Build/Repair Day — We’ll excavate, install fabric, add base lifts, apply the top course, compact, edge, and clean up.
4. Follow-Up — We provide easy care tips (like when to rake and where to top up) along with any add-on options.

Why Seattle Chooses Neat & Tidy

• We’re a local crew familiar with clay pockets, steep alleys, and Seattle’s heavy winter rain.
• Licensed & insured for your peace of mind.
• Upfront pricing—all materials, labor, hauling, and disposal included.
• We pride ourselves on on-time, respectful, and clean work.
• Green-first approach—prioritizing permeable surfacing, smart water management, and minimizing landfill waste.

Ready for a driveway or path that truly holds up?

Call or text Neat & Tidy today for a gravel install or repair that drains, compacts, and stays put. We’ll keep it tidy—so you can enjoy your space without the hassle.