SeaTac Paver Patio & Walkway Repair Services

Hello, SeaTac homeowners! 🌲 If your pavers resemble a bumpy road instead of a smooth patio, it’s time to give them some love. Those uneven surfaces, gaps, or mossy patches aren’t just aesthetic issues—they signal deeper problems like a failing base or poor drainage. At Neat & Tidy, we specialize in lifting, relaying, and re-grading paver patios and walkways, making sure they drain properly, stay intact, and keep your family safe from trips!

What’s the Problem?

Here are common issues you might encounter with your pavers:

• Sunken or heaved pavers due to SeaTac’s rainy winters and clay soils.
• Trip lips & loose bricks from washed-away bedding sand.
• Puddling by the house from incorrect grading or runoff into garden beds.
• Edge failure—plastic edging has popped out, causing borders to shift.
• Moss, weeds, and ants thriving in open joints due to missing polymeric sand.

How We Fix Pavers (the right way)

Here’s our step-by-step process to restore your pavers:

1. Inspect & map issues — We’ll examine drainage, slopes, tree roots, and settled zones to identify problems.
2. Lift & sort — We carefully remove pavers while keeping the original pattern and set aside any damaged pieces.
3. Repair the base — We remove soft spots and replace them with compacted crushed rock.
4. Reset grade — We’ll screed concrete sand to ensure water drains away from structures at the correct angle (⅛–¼” per foot).
5. Relay pavers — We’ll put everything back together with tight joints and staggered seams, matching your existing pattern perfectly.
6. Edge restraint — We’ll secure borders with new edging or a concrete toe to prevent shifting.
7. Compact & set — Using a plate compactor, we’ll set everything in place and top up the joints.
8. Polymeric re-sand — We’ll broom in, vibrate, and clean up with a blower before misting to activate the sand.
9. Drainage options — If necessary, we can add channel drains, catch basins, or French drains to enhance drainage solutions.
10. Clean & de-moss — A low-pressure rinse, safe moss treatment, and efflorescence cleaning will leave your pavers looking fresh.

We don’t cover up problems. If roots are causing issues, we’ll prune them or reroute paths instead of just hoping for the best!

What We Work On

We handle a variety of surfaces, including:

• Concrete pavers, clay bricks, and modular slabs
• Front walks, side-yard ribbons, cozy backyard patios, trash can pads, and alley approaches
• Tight-access repairs in SeaTac’s charming hills and alleys

Our Annual Maintenance Plan (Your Hardscape’s Routine)

Keep your hardscape in excellent condition with our annual maintenance plan:

• Joint health — Regular inspections and sand top-ups before the rainy season to maintain stability.
• Moss control — Seasonal treatments and promoting sun/air circulation where possible.
• Edge patrol — Early detection of border creep to re-secure them as needed.
• Drainage check — Clean channel and basin grates to keep everything flowing smoothly.
• Spot lifts — We’ll address early dips before they escalate into larger issues.

We focus on low-maintenance landscaping—fewer problems mean less work for you!

Service Cadences (Pick What Fits)

Choose a schedule that fits your lifestyle:

• Quarterly — Spring and fall resets with two light tune-ups.
• Bi-Monthly — Ideal for shaded/mossy or high-traffic areas.

(If you’ve just had fresh repairs or have heavy shade, start with monthly visits for 60–90 days, then taper off.)

What Annual Maintenance Includes

Your annual maintenance package encompasses:

• Power sweeping + low-pressure rinsing (no joint blasting, we promise!)
• Polymeric re-sand for any opened joints.
• Edge restraint checks and necessary corrections.
• Spot lift/relay for emerging dips and lips.
• Drainage inlet cleanout and moss/algae treatment.

Why Annual Maintenance Matters

Here’s why you should consider annual maintenance:

• Safety — Fewer trip hazards and reduced slickness on shaded paths.
• Longevity — Tight joints mean less water infiltration and fewer repairs over time.
• Cleaner look — Sharp edges and even surfaces outperform patchwork fixes.
• Lower cost — Small, regular corrections can save you from costly full replacements.

How It Works

Getting started is straightforward:

1. Free Estimate — We’ll take photos or do a quick walkthrough to provide clear, upfront pricing.
2. Plan & Schedule — We’ll discuss drainage, patterns, and any additional services you might want.
3. Repair Day — Our team will lift, fix the base, relay pavers, secure edges, re-sand, and clean everything up—no mess left behind!
4. Follow-Up — We’ll offer care tips (like when to rinse and how to spot joint loss) and discuss easy add-ons if needed.

Why SeaTac Chooses Neat & Tidy

Here’s what makes us the top choice in SeaTac:

• A local crew that understands marine layer moss, winter rain, and our unique clay soils.
• Licensed & insured; we keep our work sites neat and our crews respectful.
• Upfront pricing — no hidden fees; labor, materials, hauling, and disposal are all included.
• On-time, tidy finishes—no polymeric haze or gravel tracked inside your home.
• A green-first approach—whenever possible, we reuse pavers and focus on smart water management.

Ready for a patio and path that stay put?

Call or text Neat & Tidy for a straightforward paver repair—solid base, tight joints, and real drainage. We’ll keep your outdoor space looking fantastic—so you can relax and enjoy!